Impact of cyclic and continuous dry heat modification on the structural, thermal, technological, and in vitro digestibility properties of potato starch (Solanum tuberosum L.): A comparative study.

Dry heat treatment (DHT) has been demonstrated as a viable method for starch modification, offering benefits due to its environmentally friendly process and low operational costs. This research modified potato starch using different DHT conditions (continuous-CDHT and cyclic-RDHT), with durations ranging from 3 to 15 h and 1 to 5 cycles, at 120 °C. The study investigated and compared the structural, thermal, pasting, and morphological properties of the treated samples to those of untreated potato starch, including in vitro digestibility post-modification. DHT altered the amylose content of the biopolymer. X-ray diffraction patterns transitioned from type B to type C, and a decrease in relative crystallinity (RC%) was observed. Morphological changes were more pronounced in starches modified by RDHT. Paste viscosities of both CDHT and RDHT-treated starches decreased significantly, by 61.7 % and 58.1 % respectively, compared to native starch. The gelatinization enthalpy of RDHT-treated starches reduced notably, from 17.60 to 16.10 J g-1. Additionally, starch digestibility was impacted, with cyclic treatments yielding a significant increase in resistant starch content, notably an 18.26 % rise. These findings underscore the efficacy of dry heat in enhancing the functional properties of potato starch.

Production of Collagens and Protein Hydrolysates with Antimicrobial and Antioxidant Activity from Sheep Slaughter By-Products.

This work aimed to produce collagens and hydrolysates with antimicrobial and antioxidant activity from sheep slaughter by-products. The by-products (sheep and lamb) were treated and extracted. The collagens were hydrolyzed with the enzyme Alcalase®. The spectra of collagens and hydrolysates were similar (amide bands I, II, III, A, B). The bands presented by the collagens (α1, α2, ß) were characteristic of type I collagen. The hydrolysates showed molecular weight peptides equal to/lower than 15 kDa. Collagens had a denaturation temperature of 39.32 (lamb) and 36.38 °C (sheep), whereas the hydrolysates did not undergo thermal transition. Hydrolysates showed lower values of antioxidant activity (AA) than the collagens. The collagens from lamb and from sheep displayed an AA of 13.4% (concentration of 0.0002%) and 13.1% (concentration of 0.0005%), respectively. At the concentration of 0.0020%, the lamb hydrolysates displayed an AA of 10.2%, whereas the sheep hydrolysates had an AA of only 1.98%. Collagen also showed higher antimicrobial activity compared to hydrolysates, requiring a lower concentration to inhibit the microorganisms tested. Sheep slaughter by-products proved to be a viable source for obtaining protein hydrolysates and collagens with antimicrobial and antioxidant activity, which can be applied in the development of nutraceuticals beneficial to human health.

In vitro Digestibility of Starch from Ready-to-Eat Cassava and Corn Flours

Abstract Slowly digestible starch (SDS) and resistant starch (RS) associate with health benefits when present in the diet. This study aimed to evaluate ready-to-eat corn and cassava flours regarding their commercial presentation (dry or flaked), composition and in vitro digestibility of starch. Sixteen samples from Southern Brazil were procured in the market: eight dry cassava flours, six biju-type (flaked) corn flours and two biju-type cassava flours. Dry cassava flours had higher L* and lower b* values, and higher RS, relative crystallinity and viscosity peak values. Dry cassava flour partially preserves granular starch, as its processing involves lower drying temperatures and lower moisture of the pressed pulp. Dry cassava flours that had higher b* values also had higher rapidly digestible starch (RDS) levels, since higher temperatures are required in their production. Both biju-type flours showed the highest RDS values and no RS due to processing with elevated temperature and high moisture of the pressed pulp. In this study starch digestibility from the flours depended on processing, with minor influence of the raw material, fiber content and granulometry. The whiter and the smaller the granulometry of the dry cassava flours, the better they showed as potentially health benefiting.

Sweet Potato (Ipomoea batatas L): a Versatile Raw Material for the Food Industry

Abstract Sweet potato (SP) starchy roots have a broad range of colors, high-quality nutritional composition including bioactive substances (anthocyanins and β-carotene), vitamins, minerals, dietary fiber and starch. Several studies report the versatility of this root crop as part of the human diet and its possible health benefits. In this review the SP chemical composition, nutritional properties and its potential use in food processing for developing nutritious and healthy products are explored. Due to the adaptation of sweet potatoes to several agricultural managing conditions, accepting low technology /low cost with reasonable performance, it has called attention as a strong candidate of accessible functional food market.

Extraction and characterization of collagen from sheep slaughter by-products.

There is a growing search for alternative raw materials to obtain collagen and hydrolysates and processes that do not threaten the environment or human health. Thus, sheep slaughter residue, which doesn't yet have an adequate and sustainable destination, is an excellent source of study. The objective of this study was to investigate the technological properties of collagen extracted from sheep slaughter by-products. It was possible to produce and characterize collagens extracted from sheep slaughter by-products. The yield of collagen was 18.0% and 12.5% for lamb and sheep by-products, respectively, on a dry basis. Lamb and sheep collagens showed similar FTIR and digestibility spectra and increased solubility at acidic pH-value. Higher foaming capacity was found for lamb collagen, while the sheep collagen presented higher viscosity. The emulsifying power of the collagens was 59.1 and 69.6 m2/g for lamb and sheep by-products, respectively. The collagens presented bands corresponding to α1, α2, and ß chains, characteristic of collagen type I and a molecular weight (SDS-PAGE) between 100 and 5 kDa. The collagens of this study showed potential for application in food products, both for the technological improvement and nutrient enrichment, adding value and giving a sustainable destination to sheep slaughter by-products.

Assessment of physicochemical, textural and microbiological properties of brazilian white mold surface-ripened cheeses: a technological approach / Avaliação das propriedades físico-químicas, de textura e microbiológicas de queijos brasileiros maturados com mofo branco: uma abordagem tecnológica

ABSTRACT: There are no specific technical regulations regarding the identity and quality of white mold surface-ripened cheeses in Brazil. These cheeses are sold both whole (Camembert-type) and in wedges (Brie-type). The aim of the study was to evaluate the physical and chemical properties; technological parameters and microbiological safety of 20 whole cheeses (Camembert-type) and 16 cheese wedges (Brie-type) produced in Brazil. Samples showed a wide range in sodium (91.0-731.0 mg/100 g, cheeses wedges) and calcium (238.0-1100.0 mg/100g, whole cheeses) contents. The cheese groups presented no significant differences in relation to the majority of the analyzed parameters. Listeria monocytogenes was reported in 5% of the whole cheese samples. The other microbiological parameters were in accordance with the current legislation, RDC no 12/2001 of Anvisa. The comparative assessments between these two cheeses indicated that they are different. In addition, the wide range of results indicated a lack of processing standardization. The mean values of the physicochemical and textural parameters should be considered as recommended for these cheeses in Brazil.

RESUMO: No Brasil, não há uma regulamentação técnica específica sobre a identidade e qualidade de queijos maturados com mofo branco na superfície. Estes queijos são comercializados inteiros (tipo Camembert) e em cunhas (tipo Brie). O objetivo da pesquisa foi avaliar as propriedades físicas e químicas; parâmetros tecnológicos e marcadores microbiológicos de 20 queijos inteiros (tipo Camembert) e 16 cunhas de queijo (tipo Brie) produzidos no Brasil. Os teores de sódio e cálcio apresentaram elevada amplitude (8,0 e 4,6 vezes o valor mínimo, respectivamente). Os valores médios destes queijos não apresentaram diferenças significativas em relação à maioria dos parâmetros analisados. Listeria monocytogenes foi encontrada em 5% das amostras de queijo tipo Camembert. Os demais parâmetros microbiológicos estavam de acordo com a legislação vigente, RDC no 12/2001 da Anvisa. Esta avaliação comparativa entre estes dois queijos indica que são diferentes. Além disso, os valores com elevada amplitude correspondem a falta de padronização do processamento. Os valores médios poderiam ser considerados como recomendados para estes queijos no Brasil.

Cassava starch films reinforced with lignocellulose nanofibers from cassava bagasse.

Cassava bagasse, a high-fiber coproduct of cassava starch processing, was used to produce lignocellulose nanofibers (LCNF) to apply as reinforcement in cassava starch films. LCNF-reinforced cast starch films were evaluated for changes in structural, thermal and mechanical properties and compared with control films reinforced with commercial grade nanoclay (Nclay). Five different types of cassava starch cast-films were produced: no-reinforcement control, two LCNF-reinforced, and two Nclay-reinforced, each at 0.65 and 1.3% w w-1. The LCNF morphology showed the characteristic microscopic structure of lignocellulose nanofibers, with an aspect ratio > 85 and average diameter of 4.5 nm. All reinforced films were transparent and had a good distribution of the nanoparticles within. The opacity values reduced for the films with all nanoreinforcements, compared to control. The permeability to water vapor reduced with reinforcements, with lower values for the films tested with LCNF 0.65 and Nclay 1.3. Thermal stability improved with 1.3% of LCNF and both concentrations of Nclay. Tensile stress for films increased and elongation at break value decreased with both types of nanoreinforcements.

Physicochemical, Thermal, Structural and Pasting Properties of Unconventional Starches from Ginger (Zingiber officinale) and White Yam (Dioscorea sp)

Abstract Ginger and white yam starches were investigated and compared with maize starch. Proximal composition, thermogravimetry, differential scanning calorimetry, microscopy, colourimetry, X-ray powder diffractometry and pasting profile were analysed. The unconventional starches presented higher protein and ash contents than the maize starch, that had the highest thermal stability. Higher gelatinisation temperatures were reported for ginger starch, and the enthalpy of the unconventional starches were similar. The maize starch presented the lowest gelatinisation values. For the corn starch the granules were polygonal and smaller than the unconventional starches, and oval shapes and larger diameters were found for the ginger and yam starches. The unconventional starches presented less brightness and a greater tendency to red and yellow. The maize and ginger starches had A-type diffraction patterns, while the white yam starch had a C-type pattern. The highest relative crystallinity was observed for the ginger starch and there were small differences between the yam and maize starches. Higher peak viscosity and final viscosity and lower pasting temperature were observed for the yam starch. Ginger starch showed the highest shear and stability of heating glue, so may be used in products processed under high temperatures; and yam starch can be used in acidic foods that require high viscosities.

Effects of gamma radiation on the stability and degradation kinetics of phenolic compounds and antioxidant activity during storage of (Oryza sativa L) black rice flour

Abstract The effects of gamma radiation (0, 1, 2 and 3 kGy) were used to evaluate the stability and thermal degradation kinetics of anthocyanins, as well as the stability of total phenolic compounds (TPC) and antioxidant activity at different temperatures (4, 25, 35 and 45 °C) during the storage (0, 30, 60, 90 and 120 days) of black rice flour. This flour can be used as ingredient for gluten-free cereal products with higher nutritional value. For this it is necessary to preserve the anthocyanin content during thermal processing and shelf-life periods. At time 0, the dose of 3 kGy provided all of the most available bioactive compounds, raising their antioxidant potential, except for TPC. During the storage at different temperatures up to 120 days, gradual losses occurred in all the analysed parameters. Regarding the total anthocyanin content and TPC, the sample irradiated with a 1 kGy dose remained most stable. The analysis of kinetic data indicated a first-order reaction for the degradation of anthocyanins. The combination of irradiation with different temperatures may improve the shelf-life of black rice flour.

Gluten-free baked foods with extended shelf-life.

The objective of this study was to develop a formulation that can retard staling/retrogradation of cheese breads without compromising their texture and expansion properties. During baking the dough expands and becomes soft, with lower density. Binary mixtures of cassava starch (Native + Oxidized) and with guar gum (Oxidized + Guar Gum) as well as a ternary mixture (Native + Oxidized + Guar Gum) were prepared. The mixtures were analyzed for freeze-thaw stability, expansion, pasting, thermal structural and retrogradation properties. The results were compared with those of sour cassava starch (polvilho azedo-PA), native cassava starch (N) and oxidized cassava starch (O). Moreover, cheese breads were prepared with these mixtures and evaluated during storage. The ternary mixture N + O + GG showed superior freeze-thaw stability (syneresis of 4.9, 7.8 and 11.0% in 1st, 2nd and 3rd cycles, respectively); the low retrogradation of this sample was confirmed both by DSC and FTIR analyses. The sample N + O + GG had a high expansion (> 10 mL/g) and the cheese breads developed with this mixture had a slower staling. Our results confirmed that the mixture N + O + GG can improve formulations of gluten-free baked foods.

Enzymatic hydrolysis (pepsin) assisted by ultrasound in the functional Properties of hydrolyzates from different collagens / Hidrólise enzimática (pepsina) assistida por ultrassom nas propriedades Funcionais de hidrolisados de diferentes colágenos

ABSTRACT: Enzymatic hydrolysis (pepsin) assisted with or without ultrasound in the functional properties of hydrolyzates from different collagens were analyzed. Degree of hydrolysis, antioxidant activity (DPPH) and antimicrobial activity (MIC) were assessed. The treatment that resulted in greater antioxidant activity for the fiber sample was with the use of 4% of enzyme and concomitant ultrasound (40.7%), leading to a degree of hydrolysis of 21.7%. For the powdered fiber sample the hydrolysis treatment with use of 4% of enzyme resulted in lower protein content (6.97mg/mL), higher degree of hydrolysis (19.9%) and greater antioxidant activity (38.6%). The hydrolyzates showed inhibitory capacity against gram-negative bacteria Salmonella choleraesuis and gram-positive bacteria Staphylococcus aureus. It can be concluded that enzymatic hydrolysis concomitant or not with the use of ultrasound increased the functionality of the fiber and powdered fiber samples, for the other samples its use as supplementary treatment was not productive, due to the worse results of antioxidant activity (DPPH) reported. However, it provided greater hydrolysis degree.

RESUMO: Foram avaliados os efeitos da hidrólise enzimática (pepsina) assistida com ou sem ultrassom nas propriedades funcionais de hidrolisados de diferentes colágenos. Foi analisado o grau de hidrólise, a atividade antioxidante (DPPH) e a atividade antimicrobiana (MIC). O tratamento que possibilitou maior atividade antioxidante para a amostra fibra foi com a utilização de 4% de enzima e ultrassom concomitante (40,7%), levando a um grau de hidrólise de 21,7%. Para a amostra fibra pó o tratamento de hidrólise com uso de 4% de enzima resultou em menor teor de proteína (6,97mg/mL), maior grau de hidrólise (19,9%) e maior atividade antioxidante (38,6%). Os hidrolisados mostraram capacidade inibitória contra a bactéria gram-negativa Salmonella choleraesuis e gram-positiva Staphylococcus aureus. Pode-se concluir que a hidrólise enzimática concomitante, ou não, ao uso do ultrassom apresentou aumento da funcionalidade das amostras fibra e fibra pó. Para as demais amostras, sua utilização como tratamento complementar, a hidrólise não foi interessante, devido aos piores resultados de atividade antioxidante (DPPH) encontrados. Porém, proporcionou maior grau de hidrólise.

Ripened Semihard Cheese Covered with Lard and Dehydrated Rosemary (Rosmarinus officinalis L.) Leaves: Processing, Characterization, and Quality Traits.

This study aimed to establish a manufacturing protocol and to characterize semihard cheese covered with lard and rosemary during ripening. After the manufacturing protocol was defined, the cheeses were produced with pasteurized and raw milk from Holstein cows, with and without (control) coating, and then ripened for 60 d. During this period the physicochemical properties, color, proteolysis, texture profile, and sensory acceptance were performed. The early-ripening cheeses differed from the others in terms of color and moisture content. Multivariate statistical analysis separated chesses in groups differentiated by the effects of heat treatment of milk and ripening period. The ripened cheeses obtained from raw milk were sensorially more preferred. The coating gave the final products higher moisture content and favored color and texture characteristics. Consumer testing showed that the cheese obtained from raw milk and coated with lard and rosemary was the most preferred (acceptance of 82%) due to the specific coating of rosemary (aroma and flavor). This product has potential to add value and to diversify the production of semihard cheeses.

Blackberry (Rubus spp.): influence of ripening and processing on levels of phenolic compounds and antioxidant activity of the 'Brazos' and 'Tupy' varieties grown in Brazil / Amora Preta (Rubus spp.): influência do estádio de maturação e do processamento nos teores de compostos fenólicos e atividade antioxidante das variedades 'Brazos' e 'Tupy' cultivadas no Brasil

Fruits from temperate and tropical climates which have high levels of antioxidant compounds are the source of numerous studies concerning the correlation with benefits to human health. The objectives of this study were to quantify the anthocyanins and phenolic compounds and also to measure the antioxidant activity (ferric reducing antioxidant power - FRAP) of blackberries from two varieties grown in southern Brazil ('Brazos' and 'Tupy') at three stages of ripening; unripe, semi-ripe, ripe and their products (pulp and fermented products). During fruit ripening it was observed that weight, size, diameter and sugars increase significantly and acidity decreased significantly. The anthocyanin content ranged from 4.19 (semi-ripe 'Tupy' variety) to 205.75mg 100g-1 (ripe 'Brazos' variety). The highest levels of phenolic compounds were observed for the unripe fruit of both varieties, while antioxidant activity showed no significant difference during the ripening stages. The studied pulp showed a high content of phenolic compounds (ten times higher than that found in the ripe fruits). The anthocyanin content and antioxidant activity did not show the same increase due to the degradation of anthocyanins caused by the heat treatment that was used. The alcoholic fermented beverage made from blackberries remained stable (total phenolic compounds and antioxidant activity) during two years of storage, but the in third year a significant reduction in antioxidant activity was observed. These results can be important for establishing the shelf life of this kind of product made with blackberry.

Algumas frutas de clima temperado e tropical, principalmente as do tipo "berries", têm como característica o acúmulo de compostos antioxidantes e são objeto de inúmeros estudos, haja vista a sua correlação com os benefícios para a saúde humana. Os objetivos deste trabalho foram quantificar as antocianinas, os compostos fenólicos e mensurar a capacidade antioxidante (ferric reducing antioxidant power - FRAP) de amoras-pretas de duas cultivares ('Brazos' e 'Tupy'), nos três estágios de maturação, considerados verde, semi-maduro e maduro, e dos seus produtos (polpas e fermentados). No processo de maturação da fruta, observou-se que o peso, tamanho, diâmetro e teor de açúcar aumentaram significativamente enquanto a acidez diminuiu. Os teores de antocianinas aumentaram de 4,19 (FSM cv. 'Tupy') (frutos semi-maduros) para 205,75mg 100g-1 (FM cv. 'Brazos') (frutos maduros). Os maiores teores de compostos fenólicos foram verificados para os frutos verdes (FV) das duas cultivares, enquanto a atividade antioxidante não apresentou diferença significativa nos estádios de maturação. A polpa estudada acumulou um elevado teor de compostos fenólicos (dez vezes superior ao encontrado nas frutas maduras). Os teores de antocianinas e de atividade antioxidante não apresentaram o mesmo perfil em função da degradação das antocianinas pelo processo térmico utilizado. O fermentado alcoólico de amora permaneceu estável (fenóis totais e atividade antioxidante) durante dois anos de estocagem, porém, no terceiro ano, foi observada uma redução significativa da atividade antioxidante. Estes resultados são importantes para o estabelecimento da vida-de-prateleira desses produtos derivados da amora.

Characterisation of Cassava Bagasse and Composites Prepared by Blending with Low-Density Polyethylene

The main objective of this study was to characterise the cassava bagasse and to evaluate its addition in composites. Two cassava bagasse samples were characterised using physicochemical, thermal and microscopic techniques, and by obtaining their spectra in the mid-infrared region and analysing them by using x-ray diffraction. Utilising sorption isotherms, it was possible to establish the acceptable conditions of temperature and relative humidity for the storage of the cassava bagasse. The incorporation of cassava bagasse in a low-density polyethylene (LDP) matrix was positive, increasing the elasticity modulus values from 131.90 for LDP to 186.2 for 70% LDP with 30% SP bagasse. These results were encouraging because cassava bagasse could serve as a structural reinforcement, as well as having environmental advantages for its application in packaging, construction and automotive parts.

Physicochemical properties of cassava starch oxidized by sodium hypochlorite.

In this work, cassava starch was modified by treatment with sodium hypochlorite (NaClO) at different concentrations (0.8, 2.0 and 5.0 % of active chlorine) and selected physicochemical properties of the oxidized starches were investigated. The native and modified samples were evaluated considering moisture, carboxyl content, apparent viscosity, susceptibility to syneresis, mid-infrared spectroscopy and crystallinity index. The treatment with NaClO resulted in alterations in carboxyl content of the oxidized starches that increased with increasing concentration of the oxidant. Oxidized starches also showed higher susceptibility to syneresis, as assessed by the release of liquid during freezing and thawing. Apparent viscosity analysis showed decrease in peak viscosity of the oxidized starches. X-ray diffractograms showed that the oxidation influenced the extent of cassava starch relative crystallinity found to lie between 34.4 % (native) and 39.9 % (2.0 % active chlorine). The infrared spectra are sensitive to structural changes on starch macromolecules and presented characteristic peaks as C-O-C of the six carbon glucose ring absorbs at 1,150-1,085 cm(-1) and due to axial deformation these bands changed with the crystal structure of the starch samples.

Optimisation of the extraction of phenolic compounds from apples using response surface methodology.

The extraction of phenolic compounds from apples was optimised using response surface methodology (RSM). A Box-Behnken design was conducted to analyse the effects of solvent concentration (methanol or acetone), temperature and time on the extraction of total phenolic content, total flavonoids and antioxidant capacity (FRAP and DPPH). Analysis of the individual phenolics was performed by HPLC in optimal extraction conditions. The optimisation suggested that extraction with 84.5% methanol for 15 min, at 28 °C and extraction with 65% acetone for 20 min, at 10 °C were the best solutions for this combination of variables. RSM was shown to be an adequate approach for modelling the extraction of phenolic compounds from apples. Most of the experiments with acetone solutions extracted more bioactive compounds, and hence they had more antioxidant capacity, however, chlorogenic acid and phloridzin had higher yields (32.4% and 48.4%, respectively) in extraction with methanol.

Cassava starch as a stabilizer of soy-based beverages.

Soy-based beverages are presented as healthy food alternatives for human nutrition. Cassava (Manihot esculenta, Crantz) starch is relatively inexpensive, widely available in Brazil and is broadly used by the food industry due to its desired properties that result from pasting. The objective of this study was to develop soy-based beverages with good sensory quality using native cassava starch as a stabilizer and maintaining the nutritional value that makes this product a functional food. The developed formulations featured a range of cassava starch and soybean extract concentrations, which were tested in a 2² experimental design with three central points. The results of sensory analysis showed that the studied variables (cassava starch and soybean extract concentrations) did not have a significant effect with respect to a 5% probability level. When considering the apparent viscosity, on the other hand, the variables had a significant effect: the increase in soybean extract and cassava starch concentrations caused an increase in the viscosity of the final product. The profile of isoflavones in the tested formulations was similar to the profiles reported in other papers, with a predominance of the conjugated glycosides over the aglycone forms.

Hydrolyzed collagen, modified starch and guar gum addition in turkey ham / Adição de colágeno hidrolisado, amido modificado e goma guar em presunto de peru

The main problems observed in cooked hams are bad sliceability and excessive fluid loss after cooking. To reduce these problems the industry uses non-meat ingredients such as soy protein and carrageenan, but under Brazilian law, it is not allowed to add starch or modified starch in hams. Three ingredients were tested in the present research: modified starch (0 to 2.0%), gum guar (0 to 0.30%) and hydrolyzed collagen (0 to 2.0%), following a 2³ full factorial design with five repetitions in the central point. The guar gum produced low resistance to reheating, however in losses by cooling, the results were adequate. The hydrolyzed collagen tested did not give satisfactory results, showing low acceptance due to formation of gel in the ham and high losses. The developed products were not different from the commercial product in relation to texture (P>0.05). The formulation F6 (2.0% of modified starch) was the one with the best results and greater acceptance as detected by the tasters. Based on the results obtained it seems appropriate to propose the legal permission of starch in ham or the creation of a new class of product in which starch addition would be allowed.

Os principais problemas observados em presuntos são a má fatiabilidade e a perda excessiva de líquidos após o cozimento. Para reduzir esses problemas, a indústria utiliza ingredientes não cárneos, tais como a proteína de soja e a carragena, porém, segundo a legislação brasileira, não é permitida a adição de amido ou amido modificado. Neste trabalho, foram testados três ingredientes, em presunto cozido de peru: amido modificado (0 a 2,0%), goma guar (0 a 0,30%) e colágeno hidrolisado (0 a 2,0%), seguindo um delineamento fatorial completo 2³ com cinco repetições no ponto central. A goma guar apresentou baixa resistência ao reaquecimento, no entanto, nas perdas por resfriamento, os resultados foram adequados. O colágeno hidrolisado testado não proporcionou resultados satisfatórios, sendo que os produtos apresentaram baixa aceitação devido à formação de gel e a maiores perdas. Os produtos desenvolvidos não foram diferentes do produto comercial em relação à textura (P>0,05). A formulação F6 (2,0% amido modificado) foi a que obteve os melhores resultados e a maior aceitação por parte dos julgadores. Com base nos resultados obtidos, parece-nos adequado propor a permissão legal de amido em presunto ou a criação de uma nova classe de produto para a qual se permita a utilização deste ingrediente.

Maize (Zea Mays L) landraces from the southern region of Brazil: contamination by Fusarium sp, zearalenone, physical and mechanical characteristics of the kernels

This work had as objectives the study of the physical and mechanical characteristics of maize kernels in relation to the contamination by Fusarium sp and by zearalenone in twenty landraces of maize from the southern region of Brazil. From the analyzed samples, 60 percent has been considered to have a hard endosperm type and 40 percent an intermediary one. A correlation between the physical and mechanical variables was observed as an indication that the higher is the proportion of hard endosperm, more dense will be the kernel and more force for its rupture will be necessary. The level of contamination by Fusarium sp was between 5.5 and 24.75 percent among the analyzed grains, correlating positively with the flotation index, indicating that the landraces of maize with a softer endosperm can present a higher contamination by this genus. The presence of zearalenone was verified in 75 percent of the samples, in concentrations varying from 50 to 640 µg kg-1.

Este trabalho teve por objetivos verificar as características físicas, mecânicas, contaminação por Fusarium sp e por zearalenona e suas relações, em vinte variedades crioulas de milho da região sul do Brasil. Verificou-se que das amostras analisadas, 60 por cento foram consideradas como possuidoras de endosperma do tipo duro e 40 por cento com endosperma do tipo intermediário. As variáveis físicas e mecânicas se correlacionaram, indicando que quanto maior a proporção de endosperma vítreo, mais denso e maior a força necessária até a ruptura do grão. A contaminação por Fusarium sp esteve entre 5,5 por cento e 24,75 por cento nos grãos analisados, correlacionando-se positivamente com o índice de flotação, indicando que as variedades crioulas de milho com uma maior proporção de endosperma macio podem apresentar uma maior contaminação por Fusarium sp, sugerindo-se a utilização de variedades crioulas com a textura do endosperma predominantemente vítrea. A presença de zearalenona foi verificada em 75 por cento das amostras, em concentrações que variaram de 50 a 640 µg kg-1.